中文The difference between gear oil pump and rotor pump
2021-03-16
Gear pumps and rotor pumps are both positive displacement pumps. In the definition, gear pump is also a type of rotor pump, but in actual naming, due to the time period when the cam pump flows into China. So it is usually referred to as a rotor pump, and a gear pump is named separately. The principle of conveying in the medium is basically the same for both. The main difference lies in the form of the rotor, with each having its own advantages.
1、 Differences in working principles
Rotor pump
The operation of a rotary pump relies on two synchronous rotors, and the two synchronous rotors rotate in the opposite direction. Because the two rotors rotate synchronously and in opposite directions, a strong suction force is generated at the inlet and outlet of the rotor pump, which sucks in the required material to be transported.
Gear oil pump
The operation of a gear oil pump relies on a pair of identical gears inside the pump body, which are standing side by side inside the pump. The two gears will generate negative pressure on the suction surface during operation. This negative pressure will suck the liquid into the pump body, gradually increasing the amount of liquid sucked in and producing high pressure on the discharge surface. The liquid will be sprayed out of the pump body.
2、 Differences in performance
Rotor pump
Rotary pumps are needed and used in many industries due to their following characteristics:
1. Due to its long service life, there is a gap between the two rotors of the rotary pump during operation. So there will be no friction, no calculation caused by friction.
2. The rotary pump has a wide range of applications and can transport media with high viscosity, high concentration, and even particles. This is an advantage that gear oil pumps cannot compare to.
3. The rotor pump is also a very energy-saving product. Because the rotor pump operates at a low speed, but with high efficiency.
4. The sealing of the rotary pump is relatively firm, and a complete set of insulation devices is installed inside the pump body. The rotary pump can work between 2-250 degrees. So the performance of the rotary pump is very good.
Gear oil pump
The gear oil pump has a small volume, a compact component structure, and is convenient to use, making it a good choice.
In short, there is a significant difference between gear oil pumps and rotor pumps. Both have their own advantages, and if you want to make a purchase, you can combine it with your own needs.
Previous Page
Previous Page
Focus on us
QP Machinery
Qin Ping Machinery (Shanghai) Co., Ltd.
Qin Ping Machinery (Wenzhou) Co., Ltd.
24-hour service hotline: