中文The reasons for the low flow rate of the cam rotor pump
2021-07-26
There are many reasons for the low flow rate of the cam rotor pump,. Firstly, when the flow rate of the rotary pump is too small,. The pump flow rate and head data should be observed,. Check if the rotor pump matches correctly.
After a period of use, if the flow rate of the rotary pump decreases or the pressure does not reach the expected effect,. We should first consider whether there is a decrease in flow caused by the wear of the rotor of the rotor pump,. And it should be stopped immediately for inspection to avoid causing greater losses.. The rotor pump has a simple structure,. Online maintenance,. No need to dismantle pipelines,. No special tools required, can. Replace high-strength protective lining plates and simple mechanical seals.
The cam rotor pump should be checked for excessive service life, excessive wear or damage to the pump,. And whether there is any damage or leakage in the pipeline.. Of course, it is also possible that it has not been used for a long time,. The components are corroded and oxidized,. And there may be foreign objects blocking inside the water pump (there may also be foreign objects blocking inside the water pipeline).
Some people believe that., Reverse rotation of the cam rotor pump motor can cause insufficient flow and engine damage,. But in fact, the motor reverses at a specific speed,. It will not cause damage to the pump or motor, and a small flow rate is basically not caused by reverse rotation,. In the case of reversal,. The water pump is difficult to discharge.
A cam rotor pump with a flow rate that is too small or too large is not a good thing.
Qinping Machinery (Shanghai) Co., Ltd. is a professional manufacturer of rotor pumps. The company has conducted long-term research on cam rotor pumps, and the products adopt modular design and integral casting processing. Pay attention to the use of new materials and processes during the production process, while also valuing investment in technology and equipment. Imported Demaji 5-axis CNC lathe and Mazak 4-axis machining center. The purchase and use of these high-precision processing equipment make our products comparable in quality to similar foreign products,. Established a reliable quality foundation The company has a professional team that can provide excellent choices for your various needs.
Previous Page
Previous Page
Focus on us
QP Machinery
Qin Ping Machinery (Shanghai) Co., Ltd.
Qin Ping Machinery (Wenzhou) Co., Ltd.
24-hour service hotline: